lejos.remote.ev3

Class RemoteRequestUARTPort

java.lang.Object

lejos.remote.ev3.RemoteRequestIOPort

lejos.remote.ev3.RemoteRequestUARTPort

All Implemented Interfaces:

java.io.Closeable, java.lang.AutoCloseable, BasicSensorPort, IOPort, UARTPort, EV3SensorConstants, SensorConstants

public class RemoteRequestUARTPort
extends RemoteRequestIOPort
implements UARTPort

Field Summary

Fields inherited from class lejos.remote.ev3.RemoteRequestIOPort

currentMode, openPorts, port, ref, typ

Fields inherited from interface lejos.hardware.port.UARTPort

UART_RAW_MODE

Fields inherited from interface lejos.hardware.sensor.SensorConstants

BLACK, BLANK_INDEX, BLUE, BLUE_INDEX, BROWN, GREEN, GREEN_INDEX, MAX_TYPE, MIN_TYPE, MODE_RAW, NXT_ADC_RES, RED, RED_INDEX, TYPE_ANGLE, TYPE_COLORBLUE, TYPE_COLORFULL, TYPE_COLORGREEN, TYPE_COLORNONE, TYPE_COLORRED, TYPE_CUSTOM, TYPE_HIGHSPEED, TYPE_HIGHSPEED_9V, TYPE_HISPEED, TYPE_LIGHT_ACTIVE, TYPE_LIGHT_INACTIVE, TYPE_LOWSPEED, TYPE_LOWSPEED_9V, TYPE_NO_SENSOR, TYPE_REFLECTION, TYPE_SOUND_DB, TYPE_SOUND_DBA, TYPE_SWITCH, TYPE_TEMPERATURE, WHITE, YELLOW

Fields inherited from interface lejos.hardware.sensor.EV3SensorConstants

ADC_REF, ADC_RES, CMD_AUTOMATIC, CMD_COL_AMB, CMD_COL_BLU, CMD_COL_COL, CMD_COL_GRN, CMD_COL_RED, CMD_CONNECTED, CMD_DISCONNECTED, CMD_FLOAT, CMD_NONE, CMD_PIN1, CMD_PIN5, CMD_SET, CONN_DAISYCHAIN, CONN_ERROR, CONN_INPUT_DUMB, CONN_INPUT_UART, CONN_NONE, CONN_NXT_COLOR, CONN_NXT_DUMB, CONN_NXT_IIC, CONN_OUTPUT_DUMB, CONN_OUTPUT_INTELLIGENT, CONN_OUTPUT_TACHO, CONN_UNKNOWN, IIC_DATA_LENGTH, MAX_DEVICE_DATALENGTH, MOTORS, PORTS, STATUS_BUSY, STATUS_FAIL, STATUS_OK, STATUS_STOP, TYPE_ERROR, TYPE_IIC_UNKNOWN, TYPE_MINITACHO, TYPE_NEWTACHO, TYPE_NONE, TYPE_NXT_COLOR, TYPE_NXT_IIC, TYPE_NXT_LIGHT, TYPE_NXT_SOUND, TYPE_NXT_TEST, TYPE_NXT_TOUCH, TYPE_TACHO, TYPE_TERMINAL, TYPE_THIRD_PARTY_END, TYPE_THIRD_PARTY_START, TYPE_UNKNOWN, UART_MAX_MODES

Constructor Summary

Constructors

Constructor and Description
RemoteRequestUARTPort(java.io.ObjectInputStream is, java.io.ObjectOutputStream os)

Method Summary

Modifier and Type	Method and Description
void	close() Close the port, the port can not be used after this call.
byte	getByte() read a single byte from the device
void	getBytes(byte[] vals, int offset, int len) read a number of bytes from the device
java.lang.String	getModeName(int mode) Get the string name of the specified mode.
int	getShort() read a single short from the device.
void	getShorts(short[] vals, int offset, int len) read a number of shorts from the device
boolean	initialiseSensor(int mode) Initialise the attached sensor and set it to the required operating mode. Note: This method is not normally needed as the sensor will be initialised when it is opened.
boolean	open(int typ, int portNum, RemoteRequestPort remoteRequestPort)
int	rawRead(byte[] buffer, int offset, int len) Read bytes from the uart port.
int	rawWrite(byte[] buffer, int offset, int len) Attempt to write a series of bytes to the uart port.
void	resetSensor() Reset the attached sensor.
void	setBitRate(int bitRate) Set the bit rate of the port when operating in RAW mode.
boolean	setMode(int mode) Set the current operating mode for the sensor attached to the port.
int	write(byte[] buffer, int offset, int len) Write bytes to the sensor

Methods inherited from class lejos.remote.ev3.RemoteRequestIOPort

getMode, getName, getType, setPinMode, setType, setTypeAndMode

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface lejos.hardware.port.UARTPort

toString

Methods inherited from interface lejos.hardware.port.IOPort

getName, setPinMode

Methods inherited from interface lejos.hardware.port.BasicSensorPort

getMode, getType, setType, setTypeAndMode

Constructor Detail

RemoteRequestUARTPort

public RemoteRequestUARTPort(java.io.ObjectInputStream is,
                             java.io.ObjectOutputStream os)

Method Detail

open

public boolean open(int typ,
                    int portNum,
                    RemoteRequestPort remoteRequestPort)

Overrides:

open in class RemoteRequestIOPort

close

public void close()

Description copied from interface: IOPort

Close the port, the port can not be used after this call.

Specified by:

close in interface java.io.Closeable

Specified by:

close in interface java.lang.AutoCloseable

Specified by:

close in interface IOPort

Overrides:

close in class RemoteRequestIOPort

getByte

public byte getByte()

Description copied from interface: UARTPort

read a single byte from the device

Specified by:

getByte in interface UARTPort

Returns:

the byte value

getBytes

public void getBytes(byte[] vals,
                     int offset,
                     int len)

Description copied from interface: UARTPort

read a number of bytes from the device

Specified by:

getBytes in interface UARTPort

Parameters:

vals - byte array to accept the data

offset - offset at which to store the data

len - number of bytes to read

getShort

public int getShort()

Description copied from interface: UARTPort

read a single short from the device.

Specified by:

getShort in interface UARTPort

Returns:

the short value

getShorts

public void getShorts(short[] vals,
                      int offset,
                      int len)

Description copied from interface: UARTPort

read a number of shorts from the device

Specified by:

getShorts in interface UARTPort

Parameters:

vals - short array to accept the data

offset - offset at which to store the data

len - number of shorts to read

getModeName

public java.lang.String getModeName(int mode)

Description copied from interface: UARTPort

Get the string name of the specified mode.

TODO: Make other mode data available.

Specified by:

getModeName in interface UARTPort

Parameters:

mode - mode to lookup

Returns:

String version of the mode name

initialiseSensor

public boolean initialiseSensor(int mode)

Description copied from interface: UARTPort

Initialise the attached sensor and set it to the required operating mode.
Note: This method is not normally needed as the sensor will be initialised when it is opened. However it may be of use if the sensor needs to be reset or in other cases.

Specified by:

initialiseSensor in interface UARTPort

Parameters:

mode - target mode

Returns:

true if ok false if error

resetSensor

public void resetSensor()

Description copied from interface: UARTPort

Reset the attached sensor. Following this the sensor must be initialised before it can be used.

Specified by:

resetSensor in interface UARTPort

setMode

public boolean setMode(int mode)

Description copied from interface: BasicSensorPort

Set the current operating mode for the sensor attached to the port.

Specified by:

setMode in interface BasicSensorPort

Overrides:

setMode in class RemoteRequestIOPort

Parameters:

mode - the new mode

Returns:

true if the mode has been accepted

write

public int write(byte[] buffer,
                 int offset,
                 int len)

Description copied from interface: UARTPort

Write bytes to the sensor

Specified by:

write in interface UARTPort

Parameters:

buffer - bytes to be written

offset - offset to the start of the write

len - length of the write

Returns:

number of bytes written

rawRead

public int rawRead(byte[] buffer,
                   int offset,
                   int len)

Description copied from interface: UARTPort

Read bytes from the uart port. If no bytes are available return 0.

Note: The port must have been set into RAW mode to use this method.

Specified by:

rawRead in interface UARTPort

Parameters:

buffer - The buffer to store the read bytes

offset - The offset at which to start storing the bytes

len - The maximum number of bytes to read

Returns:

The actual number of bytes read

rawWrite

public int rawWrite(byte[] buffer,
                    int offset,
                    int len)

Description copied from interface: UARTPort

Attempt to write a series of bytes to the uart port. This call is non-blocking if there is no space in the write buffer a count of 0 is returned.

Note: The port must have been set into RAW mode before attempting to use the method.

Specified by:

rawWrite in interface UARTPort

Parameters:

buffer - The buffer containing the bytes to write

offset - The offset of the first byte

len - The number of bytes to attempt to write

Returns:

The actual number of bytes written

setBitRate

public void setBitRate(int bitRate)

Description copied from interface: UARTPort

Set the bit rate of the port when operating in RAW mode.

Specified by:

setBitRate in interface UARTPort

Parameters:

bitRate - The new bit rate