New to using Enchanting - experienced user of NXT - Fairly experienced with Java
NXT brick is definitely flashed - shows Lejos on the display when powered up
Wrote simple project
Anytime I try to send to the brick - it says Device is Busy
restarted device
Restarted Enchanting
Is there something I am missing??
Device is busy - unable to download
Moderator: clintonb
-
- Active User
- Posts: 138
- Joined: Fri May 28, 2010 1:44 am
- Location: Cardston, Alberta, Canada
- Contact:
Re: Device is busy - unable to download
I've had an issue like that on occasion, but it doesn't usually persist. I tend to follow a similar set of steps:
- restart the robot (and try again)
- restart Enchanting (and try again)
- reboot the computer (and try again)
Beyond that I might try:
- re-install the driver and reboot the computer (and try again)
- re-flash the firmware on the NXT (and try again)
As you are experienced with Java, you might try running in verbose mode, and see if that yields any insights.
Cheers,
Clinton
- restart the robot (and try again)
- restart Enchanting (and try again)
- reboot the computer (and try again)
Beyond that I might try:
- re-install the driver and reboot the computer (and try again)
- re-flash the firmware on the NXT (and try again)
As you are experienced with Java, you might try running in verbose mode, and see if that yields any insights.
Cheers,
Clinton
Return to “Enchanting Questions and Projects”
Who is online
Users browsing this forum: No registered users and 1 guest