NXT 2.0 brick dead

This is where you talk about the NXJ hardware related topics such as the brick, sensors, LEGO pieces, etc.

Moderators: imaqine, 99jonathan, roger

ruperty
Advanced Member
Posts: 179
Joined: Sun Oct 14, 2007 11:21 am

NXT 2.0 brick dead

Postby ruperty » Wed Aug 16, 2017 10:55 am

I have a NXT 2.0 brick which I didn't use for a year. When I then tried to turn it on there was no response from it whatsoever; no sounds or anything on the display. That was two years ago.

I've just tried it again with normal batteries and the rechargeable battery, but still no response.

I am assuming it is unrecoverable but is there anything I can try before I give up on it completely?
Regards,
Rupert
www.perceptualrobots.com

User avatar
gloomyandy
leJOS Team Member
Posts: 5867
Joined: Fri Sep 28, 2007 2:06 pm
Location: UK

Re: NXT 2.0 brick dead

Postby gloomyandy » Wed Aug 16, 2017 3:16 pm

Doesn't sound good! I assume you have tried pressing the reset button (holding it down) to see if it enters programming mode (clicking). Might be worth plugging it in to a PC to see if it is recognised (speaker may be bust and it may be in update mode?). Take it apart and check to see if the wiring looks ok? Contact LEGO (you never know!).
leJOS news https://lejosnews.wordpress.com/


Return to “NXJ Hardware”

Who is online

Users browsing this forum: No registered users and 1 guest