Multiple EV3 Controller connected to a single PC

This is where you talk about the EV3 software itself, installation issues, and programming talk.

Moderators: roger, gloomyandy, skoehler

New User
Posts: 1
Joined: Wed May 07, 2014 4:42 pm

Multiple EV3 Controller connected to a single PC

Postby nitroxide » Wed May 07, 2014 4:56 pm

Hi guys,

at the moment I am developing a software that is supposed to run on a Raspberry Pie and is connected to two EV3 controllers simultaneously. My problem is that to me it seems impossible to establish a network connection to both EV3s at the same time. I managed to change the IP address of one EV3 from to by changing the netaddress file located on the SD card. But that doesn't help me out. At the moment I am facing the fact that my computer (running Ubuntu 13.10) creates a new network connection with every EV3 I connect via USB (What makes sense, because the computer sees them as two individual network interfaces). But I want them to be in the same network, using the same network connection, so that I am able to establish a TCP connection between Pie and the 2 EV3s. Do you guys have any experience connecting multiple EV3s to one single computer?

Thanks in advance,


Posts: 39
Joined: Mon Nov 04, 2013 7:04 pm

Re: Multiple EV3 Controller connected to a single PC

Postby floydbloke » Thu May 08, 2014 8:28 pm

Sorry I don't have the Linux skills to help with the detail, but have you explored IP forwarding / routing on the Ubuntu box.

User avatar
leJOS Team Member
Posts: 5971
Joined: Fri Sep 28, 2007 2:06 pm
Location: UK

Re: Multiple EV3 Controller connected to a single PC

Postby gloomyandy » Sun May 11, 2014 12:13 am

You do not want to have both EV3s be on the same network. Try setting one to and the other to the subnet masks passed back by the dhcp server should then ensure that the correct route is setup on the PC.

Return to “EV3 Software”

Who is online

Users browsing this forum: No registered users and 2 guests