Need Help - Design

Post your NXJ projects, project ideas, etc here!

Moderators: imaqine, 99jonathan, roger

Posts: 48
Joined: Tue Mar 02, 2010 11:22 pm

Need Help - Design

Postby win1for » Fri Mar 05, 2010 9:27 pm

Hi Guys,

I am developing a project to visualize the activities of a robot in a warehouse. There will be a separate program running on the robots and the crossings/roads in the warehouse.

This program will communicate with the GUI running on the PC(the program on the PC visualizes the activities of the robots - movement, placing pallets on shelves etc...).

I am required to implement the project in such a way that a change in the program running on the robots will not affect the program running on the PC (GUI) and vice versa. Or a change on one side must results in a minimum change on the other side. There should not be a major change on one side when new functionalities must be added to the other side.

I need ideas about how to accomplish this.

Thank you very much.

leJOS Team Member
Posts: 965
Joined: Mon Feb 05, 2007 1:27 pm

Postby lawrie » Sat Mar 13, 2010 10:30 am

You need to define a message protocol between the PC and the robot using data streams. Typically, you would define a set of commands and responses. If both sides stick to this protocol, they can change as much as you like.

Return to “NXJ Projects”

Who is online

Users browsing this forum: No registered users and 0 guests